spec no: dsah8625 rev no: v.1 date: oct/27/2007 page: 1 of 4 approved: wynec checked: joe lee drawn: c.wang erp: 1301000316 9.14mm (0.36inch) single digit numeric display part number: SA36-11EWA high efficiency red features z 0.36 inch digit height. z low current operation. z excellent character appearance. z easy mounting on p.c. boards or sockets. z i.c. compatible. z categorized for luminous intensity. z mechanically rugged. z standard : gray face, white segment. z moisture sensitivity level : level 2. z rohs compliant. description the high efficiency red source color devices are made with gallium arsenide phosphide on gallium phosphide orange light emitting diode. package dimensions& internal circuit diagram notes: 1. all dimensions are in millimeters (inches), tolerance is 0.25(0.01")unless otherwise noted. 2. specifications are subject to change without notice.
spec no: dsah8625 rev no: v.1 date: oct/27/2007 page: 2 of 4 approved: wynec checked: joe lee drawn: c.wang erp: 1301000316 selection guide note: 1. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. part no. dice lens type iv (ucd) [1] @ 10ma min. typ. SA36-11EWA high efficiency red (g aasp/gap) white diffused 480 1900 common anode, rt. hand decimal. description symbol parameter device typ. max. units test conditions peak peak wavelength high efficiency red 627 nm i f =20ma d [1] dominant wavelength high efficiency red 625 nm i f =20ma ? 1/2 spectral line half-width high efficiency red 45 nm i f =20ma c capacitance high efficiency red 15 pf v f =0v;f=1mhz v f [2] forward voltage high efficiency red 2.0 2.5 v i f =20ma i r reverse current high efficiency red 10 ua v r =5v parameter high efficiency red units power dissipation 75 mw dc forward current 30 ma peak forward current [1] 160 ma reverse voltage 5 v operating / storage temperature -40c to +85c lead solder temperature[2] 260c for 3-5 seconds
spec no: dsah8625 rev no: v.1 date: oct/27/2007 page: 3 of 4 approved: wynec checked: joe lee drawn: c.wang erp: 1301000316 high efficiency red SA36-11EWA
spec no: dsah8625 rev no: v.1 date: oct/27/2007 page: 4 of 4 approved: wynec checked: joe lee drawn: c.wang erp: 1301000316 packing & label specifications SA36-11EWA
|
